Tel:+86-010-52258186

E-mail:info@sunnymetal-group.com

Products

In addition to providing Galvanized Wire, Iron Wire, Wire Mesh Series and Ground Protection Solutions, Sunny assisted by other industries (financial and logistics) also has incomparable advantage in the wire mesh export market.

Galvanized Oval Wire

Release Date:  [11/3/2015]     Hit Count:  []

FOB Price:US $500 - 1,000 / Ton
Min.Order Quantity:10 Ton/Tons
Supply Ability:36500 Ton/Tons per Year
Port: Tianjin
Payment Terms:T/T,L/C

Basic material for oval wire: Low carbon steel wire rod, galvanized steel wire and high carbon steel wire

Main Sizes: 2.4*3.0mm 2.2*2.7mm 2.35*2.35m. Other sizes custom made.

Processing: Oval wire is made from high quality high tensile wire by redrawing equipment, mainly used in South America and other countries for farms and fencing.

Steel Material: 45#,55# and 65# high carbon steel

Tensile Strength: 600 KGF-1400KGF

Common Sizes of oval wire

wire gauge size

SWG(mm)

BWG(mm)

J. de p

12

2.64

2.77

1.8

13

2.34

2.41

2.0

14

2.03

2.11

2.2

15

1.83

1.83

2.4

16

1.63

1.65

2.7

17

1.42

1.47

3.0

18

1.22

1.25

3.4

19

1.02

1.07

3.9

20

0.91

0.89

4.4

21

0.81

0.813

4.9

22

0.710

0.711

5.4

23

0.6096

0.6347

5.9

Galvanized Oval Wire
Galvanized Oval Wire
Galvanized Oval Wire
Galvanized Oval Wire
Galvanized Oval Wire
Galvanized Oval Wire

Plain Weave: Each weft wire passes over one and under one warp wire, and each warp wire passes over one and under one weft wire, every weft wire have and warp wire the same diameter.
Twill: Wire Cloth in which each warp wire and each shute wire passes successively over and under the two adjacent wires -- in both the warp and shute directions. This over and under movement is shifted one wire with each pass of the shuttle. This pattern permits the weaving of heavier wires in varying meshes.
Plain Dutch Weave: Similar interlacing as in Plain Weave, except the warp wires are larger diameter than the shute wires. The lighter shute wires are driven up close thus forming a dense filtering medium. This weave displays a tapered or wedge-shaped opening.
Twill Dutch: This filter cloth specification technically combines the Twill Weave and Dutch Weave described above. The larger diameter warp wires successively pass over and under the lighter diameter shute wires. Each pass of the shute wires shifts the over and under movement one wire. The shute wires are driven up close, resulting in a tightly woven filter cloth with tapered or wedge shaped openings.
Twill Dutch Double: Very similar to Twill Dutch Weave, but by proper selection of the wire sizes, the shute wires actually overlap each other when driven up tight into position. This permits double the wires per inch in the shute direction. This type of wire cloth is usually considered a Micronic Grade filter cloth.
Stranded: In this type of weave, both the warp and shute wires are made up of separate wires, rather than a single wire. This weave is woven in the twill pattern, producing an exceptionally strong and tight mesh.

Production Process of Hot-dipped Galvanized Iron Wire:
Steel rod coil -- Wire Drawing -- Annealing -- Rust Removing -- Acid Washing -- Zinc Plating -- Wire Coiling.

For big coil galvanized iron wire, we also have wire rewinding machine to layout the small coil wire and winding it again into big coils with different inner diameter.

Galvanizing Technology: Galvanizing is a corrosion protection process for steel or iron, in which the substrate is coated with zinc to prevent it from rusting. The galvanization process entails immersing clean, oxide-free iron or steel into molten zinc in order to form a zinc coating that is metallurgically bonded to the iron or steel's surface.

Hot-dipped Galvanized Iron Wire
Steel Rod Coil
Hot-dipped Galvanized Iron Wire
Wire Drawing
Hot-dipped Galvanized Iron Wire
Acid Washing
Hot-dipped Galvanized Iron Wire
Wire Coiling
   

Barbed Wire Fences Installation Steps and Tips
1. Select end and corner locations.

2. Install 6" × 8' wood post H-Brace assembly for ends and double corner H-Brace assemblies for corners. Should be installed in ground.
3.5' to 4' leaving 4' out of ground adjust post length if taller fence is required.

3. Carefully unroll end of 4' to 8' of barbed wire and fasten by wrapping around starting post and back onto itself at desired height for lowest strand.

4. Carefully unroll the barbed wire to end of fence.

5. Tension wire with Chain Wire Strainer at end. Cut wire to length and fasten wire at desired height as done at the beginning.

6. Cut barbed wire to length and fasten wire as done at the beginning.

7. The first wire should be adjusted (to obtain a straight line) along the fence line with light tension by picking wire up to a height of 4' to 6' then dropping wire. This

process should be repeated until straight line from beginning to end is achieved. This process will allow wire to fall creating a straight line for the fence to follow.

8. Using the first wire as a straight line, install line posts (wood or steel) at 15' to 20' apart, adjusting distance as necessary. (High- pressure fences like feed lots will

need heavier posts, closer together.)

9. Fasten barbed wire to T post with wire clip (usually provided with new T posts) and/or staple barbed wire to wood posts leaving room for wire to “float” when stapled (Do

not staple wire tight to post.)

10. When installing line posts make sure that any post that will have strain (vertical or horizontal) on it is stout and secure enough to take the strain. As in wood post 5" to

6" × 8' (multiples if necessary) in dips or other low areas and on crowns or high areas.

11. Repeat necessary process for additional wires.

The additional installation of a one or more “non-barbed” electrified wire can offer an additional “pain barrier” as well as a feeder wire to barbed wire systems.

Quality Control: Wire checking; quality control and checking of every stage of production; checking of finished products.
Stainless Steel Woven Mesh
Stainless Steel Woven Mesh
Stainless Steel Woven Mesh
Stainless Steel Woven Mesh
Stainless Steel Woven Mesh
Stainless Steel Woven Mesh
Galvanized Oval Wire
Galvanized Oval Wire
Galvanized Oval Wire
Galvanized Oval Wire
Galvanized Oval Wire
Galvanized Oval Wire

Application of Hot Dip Galvanized Steel Wire (GI Wire) :
Communication devices, medical treatment equipment, weaving of wire mesh,brushes, steel rope, filter wire mesh, high pressure pipes, construction, arts and crafts,etc.

Galvanized Iron Wire
Basket Mesh
Galvanized Iron Wire
Galvanized Wire Gas-liquid Filter
Galvanized Iron Wire
Insect Window Screen
Galvanized Iron Wire
Galvanized Welded Mesh
Galvanized Iron Wire
Iron Wire Arts
Galvanized Iron Wire
Wire Rope

Send your message to this supplier

Sunny will services for you !
Address:No.68 Yuhua South Road Anping County Hebei Province China.
Tel:+86-318-7532188/7512838/7523138
Mobile:+86-13811920972
Fax:+86-318-7524828
E-mail:sunlight@wire-cloth.org

name:

E-mail:

Phone:

Title:

Message:

Related Products
Copyright(c) 2015 Anping Sunshine Metal Product Factory All reversed Design by [Rongchuangmedia] Link: google