Tel:+86-010-52258186

E-mail:info@sunnymetal-group.com

Products

In addition to providing Galvanized Wire, Iron Wire, Wire Mesh Series and Ground Protection Solutions, Sunny assisted by other industries (financial and logistics) also has incomparable advantage in the wire mesh export market.

Cut Wire

Release Date:  [11/3/2015]     Hit Count:  []

FOB Price:US $500 - 700 / Ton
Min.Order Quantity:5 Ton/Tons as your require
Supply Ability:100 Ton/Tons per Week as your require
Port: Tianjin
Payment Terms:T/T,L/C

Straightened cut wire is a kind of tie wire made with iron wire cutting to certain sizes after being straightened. Wire materials for straight cut wire can be bright iron wire, annealed wire, electric galvanized wire, PVC coated iron wire or painted iron wire. It is easy for transport and handle, finds popular application in construction, handicrafts or daily use. We also supply tie wire in coils and other forms.

Standard specification of straight cut wire: Wire gauge 8#-23# (wire diameter from 0.6mm to 4.5mm) while the length varies according to our customers' needs.

Material: Electric galvanized iron wire, hot-dip zinc-plating iron wire, black iron wire.

Name

Wire Diameter

Length

Mild Steel Tie Wire

0.6

According to customers requirements.

0.7

0.8

0.9 1.0

1.2 1.45

1.5

Cut Wire
Cut Wire
Cut Wire
Cut Wire
Cut Wire
Cut Wire

Plain Weave: Each weft wire passes over one and under one warp wire, and each warp wire passes over one and under one weft wire, every weft wire have and warp wire the same diameter.
Twill: Wire Cloth in which each warp wire and each shute wire passes successively over and under the two adjacent wires -- in both the warp and shute directions. This over and under movement is shifted one wire with each pass of the shuttle. This pattern permits the weaving of heavier wires in varying meshes.
Plain Dutch Weave: Similar interlacing as in Plain Weave, except the warp wires are larger diameter than the shute wires. The lighter shute wires are driven up close thus forming a dense filtering medium. This weave displays a tapered or wedge-shaped opening.
Twill Dutch: This filter cloth specification technically combines the Twill Weave and Dutch Weave described above. The larger diameter warp wires successively pass over and under the lighter diameter shute wires. Each pass of the shute wires shifts the over and under movement one wire. The shute wires are driven up close, resulting in a tightly woven filter cloth with tapered or wedge shaped openings.
Twill Dutch Double: Very similar to Twill Dutch Weave, but by proper selection of the wire sizes, the shute wires actually overlap each other when driven up tight into position. This permits double the wires per inch in the shute direction. This type of wire cloth is usually considered a Micronic Grade filter cloth.
Stranded: In this type of weave, both the warp and shute wires are made up of separate wires, rather than a single wire. This weave is woven in the twill pattern, producing an exceptionally strong and tight mesh.
We produce usually goes through standard processes under careful control from Steel rod coil -- Wire Drawing -- Wire Annealing--Rust Removing-- Acid Washing-- Boiling-- Drying-- Zinc Feeding-- Wire Coiling.

Barbed Wire Fences Installation Steps and Tips
1. Select end and corner locations.

2. Install 6" × 8' wood post H-Brace assembly for ends and double corner H-Brace assemblies for corners. Should be installed in ground.
3.5' to 4' leaving 4' out of ground adjust post length if taller fence is required.

3. Carefully unroll end of 4' to 8' of barbed wire and fasten by wrapping around starting post and back onto itself at desired height for lowest strand.

4. Carefully unroll the barbed wire to end of fence.

5. Tension wire with Chain Wire Strainer at end. Cut wire to length and fasten wire at desired height as done at the beginning.

6. Cut barbed wire to length and fasten wire as done at the beginning.

7. The first wire should be adjusted (to obtain a straight line) along the fence line with light tension by picking wire up to a height of 4' to 6' then dropping wire. This

process should be repeated until straight line from beginning to end is achieved. This process will allow wire to fall creating a straight line for the fence to follow.

8. Using the first wire as a straight line, install line posts (wood or steel) at 15' to 20' apart, adjusting distance as necessary. (High- pressure fences like feed lots will

need heavier posts, closer together.)

9. Fasten barbed wire to T post with wire clip (usually provided with new T posts) and/or staple barbed wire to wood posts leaving room for wire to “float” when stapled (Do

not staple wire tight to post.)

10. When installing line posts make sure that any post that will have strain (vertical or horizontal) on it is stout and secure enough to take the strain. As in wood post 5" to

6" × 8' (multiples if necessary) in dips or other low areas and on crowns or high areas.

11. Repeat necessary process for additional wires.

The additional installation of a one or more “non-barbed” electrified wire can offer an additional “pain barrier” as well as a feeder wire to barbed wire systems.

Quality Control: Wire checking; quality control and checking of every stage of production; checking of finished products.
Stainless Steel Woven Mesh
Stainless Steel Woven Mesh
Stainless Steel Woven Mesh
Stainless Steel Woven Mesh
Stainless Steel Woven Mesh
Stainless Steel Woven Mesh
Cut Wire
Cut Wire
Cut Wire
Cut Wire
Cut Wire
Cut Wire
Cut Wire
Cut Wire
Cut Wire
Gabion Box
Gabion Box
Gabion Box
Gabion Box
Gabion Box
Gabion Box
Gabion Box
Gabion Box
Gabion Box

Send your message to this supplier

Sunny will services for you !
Address:No.68 Yuhua South Road Anping County Hebei Province China.
Tel:+86-318-7532188/7512838/7523138
Mobile:+86-13811920972
Fax:+86-318-7524828
E-mail:sunlight@wire-cloth.org

name:

E-mail:

Phone:

Title:

Message:

Related Products
Copyright(c) 2015 Anping Sunshine Metal Product Factory All reversed Design by [Rongchuangmedia] Link: google