Slab Bolster

Sunshine Slab Bolster is used for supporting lower slab steel from slab form. Legs are spaced 5” on center. Available in 3/4” to 3” heights in 5’-0” lengths. Other lengths are available on requests.

Slab bolster with plastic tip is used for supporting lower slab steel from slab form. Legs are spaced 5” on center. Available in 3/4” to 3” heights in 5’-0” lengths. Other lengths are available on request.

Slab Bolster	Slab Bolster

Slab Bolster Upper

Sunshine Slab Bolster upper is used for supporting one layer of steel above another and spacing them to required distance. May be used on soft material or fill. Standard leg spacing is 5” on centers. Heights and lengths are same as slab bolsters. Fabricated in standard 5’-0” lengths. Other lengths are available on request.

Slab Bolster Upper	Slab Bolster Upper

Slab Bolster With Plate

Sunshine Slab Bolster with plate is used for supporting lower slab steel on fill or other soft material. Details are the same as for standard slab bolster with the addition of a bearing plate. Available in 5’-0” lengths only.

Slab Bolster With Plate